Turbosound Milan M12 Powered Speaker FULL RANGE POWERED SPEAKERS
Only 2 left !
Turbosound Milan M12 Powered Speaker FULL RANGE POWERED SPEAKERS
Only 2 left !

Turbosound Milan M12 Powered Speaker


  • $599.97
  • Save $159.98

Price Match Only 2 left!

Turbosound Milan M12
1100-Watt Powered 12" Loudspeaker with KLARK TEKNIK DSP Technology
The Milan M12 is a portable 12” two-way powered loudspeaker featuring two independent input channels, mic and line inputs, two band EQ, intelligent limiting, and a Mix Out function for connection to additional Milan loudspeakers for easy system expansion.

The Class-D amplifier is a true 2-channel unit with an integrated electronic crossover, allowing the HF and LF drivers to be powered separately without one being able to influence the sound of the other. Total output power is 1,100 watts peak, providing plenty of headroom to maintain good dynamic range so that transient signals are delivered effortlessly. The lightweight switch-mode power supply coupled with industry leading Klark Teknik digital signal processing, providing dynamic equalisation and sophisticated limiting functions to ensure optimum performance and long term reliability.

The trapezoidal enclosure is fabricated from high density polypropylene, and is extensively ribbed externally and internally to eliminate resonances and also to provide an attractive and durable cabinet finish. The symmetrical 43° side angles allow the loudspeaker to be conveniently used as a floor monitor. A recessed grab handle on the top is designed for easy lifting and carrying, while the dual angle pole mount socket allows the loudspeaker to be mounted on straight poles or speaker stands either vertically, or raise higher and angled down to optimise audience coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts.

Mains power is connected via a non-locking IEC with integrated fuseholder. The illuminated front badge can operate in one of three possible modes: permanently on; permanently off; or to indicate the action of limiting.


  • 1,100 watt 2-way loudspeaker
  • Efficient Class-D amplifier
  • Roadworthy, lightweight cabinet
  • Aluminium carrying handles
  • Two discrete mic/line input channels
  • KLARK TEKNIK signal processor
  • Speech/music contour
  • Converging Elliptical Waveguide
  • Dual angle pole mount
  • Internal M10 rigging points
  • Illuminated front logo


  • Net Weight 20.5kg (45.1lbs)
  • Dimensions 620mm x 394mm x 330mm
  • Components 1 x 12" (305mm) LF driver, 1 x 1" (25mm) HF compression driver
  • Frequency Response 50Hz - 18kHz ±3dB
  • Dispersion 90°H x 60°V @ -6dB points
  • Maximum SPL 128dB peak
  • Construction Injection-moulded polypropylene enclosure.
  • Recessed carrying handles.
  • Integral dual-angle pole mount socket
  • Grille Powder coated galvanised perforated steel mesh with foam backing
  • Connectors Mic/Line input: combo jack/female XLR wired pin 2 hot
  • Mix out: male XLR wired pin 2 hot
  • IEC mains connector with integrated fuseholder with integrated fuseholder
  • Flying Hardware (6) M10 threaded internal rigging points

  • We Also Recommend