Audio Technica AT803 Omni Lav Mic w/ preamp module LAPEL MICS
OUT OF STOCK - CALL FOR ETA
Audio Technica AT803 Omni Lav Mic w/ preamp module LAPEL MICS
OUT OF STOCK - CALL FOR ETA
Audio Technica AT803 Omni Lav Mic w/ preamp module LAPEL MICS
OUT OF STOCK - CALL FOR ETA

Audio Technica AT803 Omni Lav Mic w/ preamp module

AUDIO TECHNICA

  • $219.95

OUT OF STOCK - CALL FOR ETA


Price Match Will not ship until

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.


Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa
Battery: -46 dB (5.0 mV) re 1V at 1 Pa
Maximum Input Sound Level Phantom: 135 dB SPL, 1 kHz at 1% T.H.D.
Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 107 dB, 1 kHz at Max SPL
Battery: 93 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 66 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical
(alkaline)
Switches Off, on-flat, on-roll-off
Weight (Microphone) 2.8 g (0.1 oz)
Weight (Power Module) 139 g (4.9 oz)
Weight Microphone : 2.8 g (0.1 oz) - Power Module : 139 g (4.9 oz)
Cable 1.8 m (6') long (permanently attached to microphone), 2.6 mm (0.10") diameter, 2-conductor, shielded cable with TA3F-type connector
Dimensions Microphone: 25.0 mm (0.98") long, 10.2 mm (0.40") diameter - Power Module: 84.0 mm (3.31") H x 63.0 mm (2.48") W x 22.0 mm (0.87") D
Dimensions (Power Module) 84.0 mm (3.31") H x
63.0 mm (2.48") W x
22.0 mm (0.87") D
Dimensions (Microphone) 25.0 mm (0.98") long,
10.2 mm (0.40") diameter
Output Connector (Power Module) Integral 3-pin XLRM-type
Output Connector Integral 3-pin XLRM-type (on Power Module)
Accessories Included AT8531 power module; AT8419 clothing clip; AT8116 windscreen; battery; protective carrying case
Audio-Technica Case Style M1

We Also Recommend