RCF HDL 6-A 2 x 6" Active Line Array Module - Black

The HDL6-A is the ideal choice when line array performance is needed and a fast and easy set-up a must.

RCF HDL6-A overview

The black HDL 6-A Active Line Array Module from RCF is a 2-way active line array module designed for live sound reinforcement and installed sound applications. Powered by a 1400W 2-channel class-D amplifier, it features two 6" neodymium woofers for a solid bass reproduction and a 1.7" voice coil compression driver mounted on a precise 100 x 10° waveguide. The powerful DSP processes the sound including crossover, phase correction, limiting, and protection. The system accept female XLR input connectors and line-level signals from a mixing console or other signal source. The output XLR male connector provides a loop-trough for speaker's daisy chaining. The volume knob controls the volume of the power amplifier. The control ranges from maximum attenuation to the maximum level (maximum output).

• Equipped with two aluminum rear handles for portability
• Features RCF transducers
• Integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped or spiral arrays
• Wooden reinforced composite polypropylene enclosure
• Integrated processing and cabling reduction
• Digital amplifier with switch mode power supply and DSP controlled input section with selectable presets
• Powered by a 1400W peak power digital amplifier, split 400W for the HF, and 1000W for the LF
• HF projection is adjusted by the button on the rear of the cabinets
• 2.0" inside-outside voice coil
• Water-resistant fiber doped cone
• Polycotton M-roll surround
• High-power magnetic structure
• Inside/outside coil doubles the dissipation surface
• Adhesion area to the former is doubled
• ND 340 high-power compression driver
• 1.7" voice coil with a crossover point of 900 Hz
• Coverage and dispersion control
• Edge wound voice coils
• Linear frequency response and maximum SPL output

RCF HDL6-A specs:

• Acoustic Specifications
• Frequency Response (-3 dB) 65 Hz to 20 kHz
• Maximum SPL 131 dB
• Horizontal Coverage Angle 100°
• Vertical Coverage Angle 10° maximum
• Compression Driver 1.0" (2.5 cm) neo, 1.7" (4.3 cm) voice coil
• Woofer 2 x 6" (15.2 cm) neo, 2.0" (5.1 cm) voice coil
• Input
• Input Connectors XLR male
• Output Connectors XLR female
• Input Sensitivity +4 dBu
• Power Indicators Power cord is connected and the power switch is turned on this indicator lights green
• Signal Indicator Signal indicator lights green if there is signal present on the main XLR input
• Limiter Built-in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers
• Processor
• Crossover Frequencies 900 Hz
• Protection Thermal, RMS
• Limiter Soft limiter
• Controls HF correction
• Amplifier
• Peak Power Total: 1400 W
• High Frequencies: 400 W
• Low Frequencies: 1000 W
• RMS Power Total: 700 W
• High Frequencies: 200 W
• Low Frequencies: 500 W
• Cooling Convection
• Connection VDE connector in
• Physical
• Hardware Array fittings
• Cabinet Composite PP
• Handles 2 back
• Dimensions 9.3 x 18.5 x 15" (23.7 x 47 x 37.7 cm)
• Weight 25.4 lb (11.5 kg)