Turbosound iQ10 Powered Speaker FULL RANGE POWERED SPEAKERS

In-Stock

Only 1 left !

Turbosound iQ10 Powered Speaker

TURBOSOUND

$769.97
Save $279.98

Turbosound iQ10 Powered Loudspeaker
2500 Watt 2 Way 10" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking

At a Glance:

2 way full range loudspeaker for portable PA and installation applications

2,500 Watt power featuring KLARK TEKNIK Class-D technology

KLARK TEKNIK Digital Signal Processing for total system control

Speaker modelling includes accurate models of industry standard speakers

SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement

ULTRANET digital audio networking connects to mixers and other sources

The 2,500-Watt iQ10 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 10" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copperclad aluminium voice coil for extended high frequency reproduction.

Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ10 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ10’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.

KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ10’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ10 features a mic/line switch and level control with signal present LED on each channel.

The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates.

The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ10 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Specifications:

Frequency Response: 55 Hz – 18 kHz ±3 dB/50 Hz – 20 kHz -10 dB

Nominal Dispersion: 90° H x 60° V @ -6 dB points

Maximum SPL: 129 dB peak

Crossover type: Active

Transducers: 1 x 10" (256 mm) LF driver

1 x 1" (25.4 mm) HF compression driver

Limiter: Independent HF, LF, peak and rms

Maximum output power*: 2,500 W

Type: Class-D

Protection: Short circuit, open circuit, thermal

Input A / B: 2 x combo jack/XLR

Sensitivity: Line +4 dBu, mic -22 dBu, switchable

Input impedance: 20 kΩ unbalanced, 40 kΩ balanced

Maximum input level: +21 dBur

Output A / B: 2 x XLR Linked to input

Mix output: XLR, balanced

Output impedance: 100 Ω unbalanced, 200 Ω balanced

Ultranet input/link: 2 x RJ45

Mains Supply: Neutrik powerCON input 20A and link 15A

DSP: Rotary push-encoder

Buttons for PROCESS, SETUP, EXIT, ENTER

Mixer section: 2 x gain controls (channels A and B)

2 x Line/Mic switch

Factory EQ presets: Positioning, Sound mode,

Sound modeling, FBQ

Display: LCD 128 x 32, blue backlit

Delay: 0 - 300 ms

Equalisation: High and low shelving EQ

2 x parametric EQ

Limiter: Zero attack input limiter

Presets: 20 total presets, 19 user-definable

Crossover: High Pass L-R 24 dB/oct

Protection: Lock-out function for all settings

Digital processing

A/D conversion: 24-bit,44.1/48kHz sample rate

Converter type: 24-bit,delta-sigma

System:

Signal: 16 channels

Latency: <0.9 ms

Frequency response: 20 Hz to 20 kHz (+0 / -3 dB)

Dynamic range: typical 92 dB

Cabling

Cables: Shielded CAT5

Cable length: max. 246 ft / 75 m recommended

Power consumption: 150 W @ 1⁄8 max power

Voltage (fuses)

USA / Canada: 120 V~, 60 Hz (T 15 A H 250 V)

Dimensions HWD: 20.7 x 12.7 x 12.4"

Net weight: 17.2 kg (38 lbs)

Construction: Injection-moulded polypropylene enclosure

Finish: Black painted

Grille: Powder coated perforated steel

Flying hardware: M10 x 3 points

Accessories: IQ10-WB Steel wall bracket