Audio-Technica AT-VM95E Dual Moving Magnetic Cartridge - 1/2 Mount NEEDLES & CARTRIDGES
In-Stock
Only 2 left !
Audio-Technica AT-VM95E Dual Moving Magnetic Cartridge - 1/2 Mount NEEDLES & CARTRIDGES
In-Stock
Only 2 left !
Audio-Technica AT-VM95E Dual Moving Magnetic Cartridge - 1/2 Mount NEEDLES & CARTRIDGES
In-Stock
Only 2 left !

Audio-Technica AT-VM95E Dual Moving Magnetic Cartridge - 1/2" Mount

AUDIO TECHNICA

  • $89.95

Price Match Only 2 left!


This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

    • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
    • Aluminum cantilever
    • Specially wound coils increase output voltage
    • Durable low-resonance polymer housing
    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus
Frequency Response 20-22,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Load Capacitance 100 to 200 pF
Output 4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.0 dB (1 kHz)
Stylus Shape 0.3 x 0.7 mil elliptical
Cantilever Aluminum pipe
Mount Half-inch
Weight 6.1 g (0.22 oz)
Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Replacement Stylus AT-VMN95E
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers

We Also Recommend