Boss Katana KTN-HEAD- 100W Guitar Head Amplifier

BOSS

  • $499.99

Price Match

Boss Katana-Head - 100W Amplifier for Electric Guitars

Designed to provide you with gig-ready rock tones while minimizing your reliance on a pedalboard, the Katana-Head Guitar Amplifier from BOSS provides 100W at eight or 16 Ohms, and also features a 5" internal speaker for monitoring your tone or practicing at home without a cabinet. When using the internal speaker, the amp provides 30W of power. The amp gives you access to 55 BOSS effects via BOSS's Tone Central. Using a USB connection, you can port any 15 effects into the amplifier at any one time, with three separate effects available for simultaneous usage. Once you select among these effects—as well as among five different onboard amp characteristics and EQ/presence controls—you can store your tone into one of four recallable Tone Setting memories. In this manner, you can easily change your tonal array onstage without a complicated tap dance routine.

Turn your attention to the rear of the amplifier head and you'll notice quite a few connective possibilities. For instance, you'll see the speaker output right alongside the headphones/recording output. This gives you the ability to direct your sound to cabinets, headphones, and recording devices with a minimal amount of maneuvering. Additionally, a line out jack allows you to route line-level signal to mixers and PAs. An effects loop affords you the opportunity to use outboard gear, and an auxiliary input jack lets you play audio from compatible players through the amplifier head.

But wait, there's more! For external control, there are two different footswitch inputs, one for channel selection/expression pedals, and one specifically tailored to the all-encompassing GA-FC foot controller. Should you wish to control the amplifier through MIDI messaging, you can do so via the dedicated MIDI input.

Features:

  • 100W of Power at 8/16 Ohms
  • 1x5" Internal Speaker (Amp at 30W Power)
  • 5 Distinct Amplifier Characters
  • 55 Effects Accessible via Tone Central
  • Stores 15 FX, 3 Available Simultaneously
  • 4 Recallable & Customizable Channels
  • Speaker Out, Phones Out & Line Out
  • Aux Input, MIDI Input & FX Loop
  • USB for Tone Central & DAW Recording
  • Footswitch & GA-FC Inputs

    Specifications:

  • Amplifier Type: Modeling
  • Output Power: 100 W RMS
  • Channels: 4
  • Output Impedance: 8/16 ohms Mono
  • Effects Loop: Yes, Series
  • Built-In Effects: Delay, Digital Reverb, Distortion/Overdrive
  • Master Volume: Yes
  • Inputs: 1 x 1/4" Mono Instrument
  • 1 x 1/4" Mono Effects Return
  • 2 x 1/4" Stereo Footswitch
  • 1 x 1/8" Stereo Aux
  • 1 x 5-Pin DIN Series MIDI
  • Outputs: 1 x 1/4" Stereo Headphone
  • 1 x 1/4" Mono Effects Send
  • 1 x 1/4" Mono External Speaker
  • 1 x USB Stereo Interface
  • Tone Section: Channel 1: Bass, Channel Volume, Gain, Mid, Presence, Treble
  • Channel 2: Bass, Channel Volume, Gain, Mid, Presence, Treble
  • Channel 3: Bass, Channel Volume, Gain, Mid, Presence, Treble
  • Channel 4: Bass, Channel Volume, Gain, Mid, Presence, Treble
  • Speaker Through/Output: 1x 1/4"
  • Configuration: 1x 5" Speaker(s)
  • Cabinet Type: Straight Closed Mono
  • Power Rating: 30 W RMS
  • Package Weight: 26.0 lb
  • Box Dimensions (LxWxH): 21.5 x 12.2 x 12.0"

  • We Also Recommend