Hartke KB15 500W Lightweight Kickback Bass Combo Amp BASS COMBOS
CALL FOR ETA
Hartke KB15 500W Lightweight Kickback Bass Combo Amp BASS COMBOS
CALL FOR ETA

Hartke KB15 500W Lightweight Kickback Bass Combo Amp

HARTKE SYSTEMS

  • $1,499.99

CALL FOR ETA


Price Match Will not ship until

Designed to tilt upwards on the stage if you should want it to—and thus, earning its name in the process—the Kickback KB15 from Hartke is a 500W combo amplifier intended for electric basses. It utilizes class-D amplification technology, and a 15" HyDrive speaker to deliver a powerful sound. The input jack can accommodate both active and passive basses, and the on-board three-band EQ will let you dial in a variety of tones, augmented all the more by the shape-control circuit. When engaged, this switch applies a 20 dB filter to a given frequency area adjustable via a knob to the right of the switch. The circuit is designed to further enhance your bass's tone. This amplifier boasts both a headphones output for silent practice as well as an XLR output for feeding direct signal to the house, mixer, or recording interface. Should you wish to loop in an external 4 Ohm cabinet, you can do so through its 1/4" speaker jack on the rear. A built-in limiter protects both the speaker and the amp from overloads, and at approximately 35 lb, the amp is relatively portable and lightweight.

Lightweight Class-D amplifier design
15" HyDrive paper/aluminum hybrid cone driver
Neodymium magnets
Unique Shape EQ contour control with variable filter
Three-band EQ
Perforated steel grille
Molded strap carry handle
Amplifier Section
Amplifier Type Solid-State
Output Power 500 W Peak
Channels 1
Output Impedance 4 ohms Mono
Master Volume Yes
Inputs 1 x 1/4" Mono Instrument
Outputs 1 x 1/4" Stereo Headphone
1 x 1/4" Mono External Speaker
1 x XLR Mono DI
Tone Section Channel 1: Bass, Mid, Treble
Speaker Section
Speaker Through/Output 1x 1/4"
Configuration 1x 15" Speaker(s)
Cabinet Type Straight Closed Mono
Power Rating 500 W Peak
250 W RMS
Construction Material Plywood
General
Dimensions (WxHxD) 17.6 x 16.7 x 21.3" / 446.0 x 425.0 x 540.0 mm Combo
Weight 35.71 lb / 16.2 kg Combo


We Also Recommend