Sennheiser E604 Dynamic Microphone

General Description

The E604 is a superb drum and brass mic. The built-in stand mount and included clip make them the perfect solution for close-miking providing low visibility. The frequency response (40Hz - 18kHz) and cardioid pattern are optimized for drum sets and other percussion instruments. They also produce exceptional results on all brass and woodwind instruments. A very high SPL rating of greater than 160dB is combined with a lightweight voice coil to provide the type of frequency response and clear, low distortion signal similar to high-end studio condenser mics. A carry pouch is also included, low Z. The frequency response and cardioid pick-up pattern are optimised for drum sets and other percussion instrument miking, whilst also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum. Very high sound pressure level handling, in excess of 160dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condensor microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fibre body takes the knocks and shocks and suppresses impact noise.

Features

Rugged reinforced glass-fibre body

Low sensitivity to impact and handling noise

Very high sound pressure handling capability

Low distortion microphone

Hum compensating coil

Easy to position due to compact design

Integral stand mount

Delivery Includes

1 e 604

1 drum clip

1 pouch

Technical Data

Frequency Response 40.....18000 Hz

Sensitivity in free field, no load (1kHz) 1,8 mV/Pa

Min. terminating impedance 1000 Ohm

Dimensions d 33 x 59 mm

Weight w/o cable 60 g Profile Cardioid instrument microphone, hum compensating coil, frequency response 40 Hz - 18 kHz, sensitivity (free field, no load) 1.8 mV/Pa at 1 kHz, nominal impedance 350 Ohm, min. terminating impedance 1 kOhm, dimensions Ø 33 x 59 mm, weight 60 g.